ウエダ ヨシオ
Ueda Yoshio
上田 良夫 所属 追手門学院大学 理工学部 電気電子工学科 職種 教授 |
|
言語種別 | 英語 |
発行・発表の年月 | 2005/03 |
形態種別 | 論文 |
査読 | 査読あり |
標題 | Hydrogen blister formation and cracking behavior for various tungsten materials |
執筆形態 | 共著・編著(代表編著を除く) |
掲載誌名 | JOURNAL OF NUCLEAR MATERIALS |
掲載区分 | 国外 |
出版社・発行元 | ELSEVIER SCIENCE BV |
巻・号・頁 | 337(1-3),pp.1010-1014 |
担当区分 | 筆頭著者 |
著者・共著者 | Y Ueda,T Funabiki,T Shimada,K Fukumoto,H Kurishita,M Nishikawa |
概要 | In order to study hydrogen blistering and subsequent cracking behavior of pure W, K-doped W, and La2O3-doped W, 1 keV H-3(+) (main ion components) ion beams were irradiated at 653 K to fluences up to 1 X 10(25) H/m(2). Two pre-irradiation heat treatments were done for stress relief (900 degrees C) and recrystallization (1300 degrees C for pure W and 1500 degrees C for K-doped and La2O3-doped W). It was found that blister characteristics and cracking behavior strongly depended on microstructures and dopant materials. For W materials with layered microstructure, blister shapes were mostly spherical-like, while for W materials with recrystallized (or disordered) microstructures, blisters had complicated plateau-like shapes with many cracks. Addition of K or La2O3 dopants increased the number of blisters and exfoliations for both stress relieved and recrystallized W. (c) 2004 Elsevier B.V. All rights reserved. |
DOI | 10.1016/j.jnucmat.2004.10.077 |
ISSN | 0022-3115 |