ウエダ ヨシオ
Ueda Yoshio
上田 良夫 所属 追手門学院大学 理工学部 電気電子工学科 職種 教授 |
|
言語種別 | 英語 |
発行・発表の年月 | 2008/09 |
形態種別 | 論文 |
査読 | 査読あり |
標題 | Effect of surface roughness and substrate material on carbon erosion and deposition in the TEXTOR tokamak |
執筆形態 | 共著・編著(代表編著を除く) |
掲載誌名 | PLASMA PHYSICS AND CONTROLLED FUSION |
掲載区分 | 国外 |
出版社・発行元 | IOP PUBLISHING LTD |
巻・号・頁 | 50(9) |
国際共著 | 国際共著 |
著者・共著者 | A. Kreter,S. Brezinsek,T. Hirai,A. Kirschner,K. Krieger,M. Mayer,V. Philipps,A. Pospieszczyk,U. Samm,O. Schmitz,B. Schweer,G. Sergienko,K. Sugiyama,T. Tanabe,Y. Ueda,P. Wienhold |
概要 | The technique of (CH4)-C-13 tracer injection through test limiters was applied to study the influence of surface roughness and substrate material on the local C-13 deposition. Spherically shaped graphite limiters with integrated gas injection were prepared with two different grades of surface roughness, similar to 0.1 and similar to 1 mu m. In addition, tungsten limiters with a roughness of similar to 0.1 mu m were used to study the substrate material effect. The limiters were exposed to the SOL plasma for two discharge scenarios, Ohmic and neutral beam heated. The C-13 deposition efficiency-the ratio of the locally deposited to the injected amount of C-13-and the deposition pattern were evaluated by post-mortem surface analysis. Surface roughness has a pronounced effect and increases the C-13 deposition efficiency on graphite with rougher surface by a factor of 3-5 compared with smoother graphite. |
DOI | 10.1088/0741-3335/50/9/095008 |
ISSN | 0741-3335/1361-6587 |